Driving is very dangerous, and to say the least, it is very dangerous when the steering wheel is difficult to turn. Since most driver’s corner at low speeds, this is when steering or hard steering is most noticeable.
But why is this so? Let’s look at some of the main reasons why your steering wheel is sticking and hard to turn.
7 Causes Hard of Steering
- Low Power Steering Fluid
- Broken serpentine Belt
- Bad Steering Rack
- Power Steering Pump Failure
- Old Thick Power Steering Fluid
- Low Tire Pressure
- Damaged Steering Components
1) Low Power Steering Fluid
A lack of power steering fluid in the system is the most common cause of stiff steering when cornering. Malfunctions usually occur in the pressure zone. Sometimes a pipe breaks or comes loose, causing fluid to leak.
The less power steering fluid there is in the system, the harder it will be to turn the steering, as this fluid is needed to pressurize the system and lubricate the pump. Even if the vehicle is still drivable, if the leak is not repaired, your power steering pump will fail and you will have to pay for it.
2) Broken Serpentine Belt
The most frequent reason for stiff steering wheels is a broken or damaged serpentine belt. This belt wears down fairly quickly over time because it is constantly being used when you drive the car.
After unloading, the steering wheel lowers. If you delay changing the belt, it will completely break and your car will be unusable. It is better to change the belt before going out.
3) Bad Steering Rack
The pinion and the rack are connected together and form the steering rack. Technical networks are connected by rules and things. Driving a vehicle over time can cause wear on the steering rack. If your steering wheel feels stiff or stiff after you start your car, you can tell when this is happening.
Lubrication works better because the engine runs longer and cooler because the steering rack heats up. So as the vehicle moves forward, the steering is weaker. Nevertheless, you should replace the steering rack as soon as possible to avoid further problems.
4) Power Steering Pump Failure
Too much pressure to turn the steering wheel correctly made by electric power steering system pump. It will be harder to change Flywheel if this pump stops working, especially at low rpm. The pump usually does not prevent the steering wheel from moving at all.
under these circumstances. It still runs, but requires a lot more effort from you. Heavy vehicle wheels make turning difficult. Before replacing the expensive pump, make sure the power steering pump connector is not damaged or loose.
5) Old Thick Power Steering Fluid
Your vehicle’s power steering fluid can thicken over time, just like any other fluid. Your vehicle’s power steering fluid may be too thick to lubricate if not changed according to the manufacturer’s instructions.
This can cause steering problems and make fast turns difficult. If the fluid seems thick and dark, change and flush the power steering fluid regularly.
6) Low Tire Pressure
More difficult to turn the steering wheel if your tires are under inflated it will be more difficult to turn the lower the air pressure on the other hand your tires are probably very low Before you notice anything additionally, it will still be simpler to turn the steering wheel than it would be with a broken serpentine belt or a completely destroyed power steering pump even if your tires are extremely low including a flat tire.
7) Damaged Steering Components
steering components every part has room to move and turning the wheel is simple when everything is operating as it should however, you have to push those parts through the damaged area if you have a snapped or damaged.
Component this can make it difficult to turn the wheel and places a great deal of additional stress on the entire system worse yet if you do Force the part, it may shatter other parts of the system such as the power steering pump hold power steering.